How To Repair A Cracked Shower Floor

There are a few options when it comes to how to repair a cracked shower pan. If yous don't know your options or do your enquiry, y'all'll be throwing money downwards the drain (pun not intended).
At that place ii important things you lot need to find out outset:

one. What caused the crevice? (i.eastward. Did something heavy dropped/brutal? Is it from regular use? Are they stress cracks?, etc.)

This data y'all would need to provide to your bathtub refinish specialist. How it cracked may determine the best option for repairing the cleaved surface.

2. Does the area surrounding the crevice flexing? If you apply weight to the area, does it bend, bow or requite?

No flex? Fantabulous!! There is a very good gamble this crevice can be easily fixed.

If the expanse flexes under pressure, your shower pan doesn't accept the proper support underneath information technology. You would be shocked as to how many shower pans lack some, if not all, support when they were installed during construction. Now, there is a possibility that the shower pan can be salvaged (by adding support) if the flexing area is approximately 1 foot in diameter. How is this done? The specialist will drill a hole (possibly even multiple holes) into the unsupported area or cut the area out, and so apply a loftier density back up cream. This support product will need to be special ordered. Avoid using the back up foam you can find at a local full general store. Those products will non agree practical weight for an extended menses of time. The holes/cut out will then exist filled with a water-proof filler and sanded flush. The whole surface area is then cleaned and prepped. The urethane acrylic colour is matched to the existing colour of the shower pan and sprayed in the needed areas or the whole shower pan can fully refinished; whichever is needed. TA-DA! (You lot may need to leave that surface alone for ane-iii days depending on the high density foam cure fourth dimension.)

Now in our experience, if the flexing area is larger than a foot, replacing the shower bowl is unremarkably the best selection. Yous can still TRY to accept a specialist repair it, but information technology may just be putting a band-aid on a broken leg. High density support foam will just exercise and so much. Replacing may be your best/only option. Talk to a specialist, go an expert opinion, but be cautious. An honest bathtub refinish specialist will let yous know is the salve is worth pursuing. Don't be taken advantage of. Do your research. Feel free to contact united states of america if you lot accept whatever questions.

This shower pan crack was caused by standing weight. The lack of back up underneath acquired the shower basin to give when someone would stand in information technology.