How To Repair Two Handle Kitchen Faucet

How to Supervene upon a Kitchen Faucet

CCO/kaboompics/Pixabay

Kitchen faucets are probably ane of the most used fixtures in homes. Many times a solar day the water is turned on and off, leading to quite a bit of habiliment and tear on this hardworking fixture. If your faucet has seen amend days, or is out of style, you tin supervene upon it with a shiny new version using but a few tools. Exchanging your old kitchen faucet with a new i tin transform the await and functionality of your kitchen in just a couple of hours.

Tools you'll Need

Take all the necessary tools for this DIY project lined up earlier you lot start to save yourself time and frustration.

• New Faucet
• Channel locking pliers
• Bowl wrench
• Plumber'due south Putty
• Adjustable Wrench
• Flexible supply lines
• Record Measure

Turn off the hot and cold water close-off valves. they're usually located in the cabinet that'due south under the sink. Then open up the faucet to save pressure.

Removing the Old Faucet

• Pace One: Using an adjustable wrench and a pair of channel locking pliers, disconnect both the water lines from the faucet. If the supply lines are old, or the gaskets are worn out, you lot may desire to replace them with flexible supply lines.
• Step Two: Using a socket wrench or basin wrench remove the nut that is holding the faucet tailpiece assembly in place. Sometimes it'south difficult to loosen old faucet basics, in that case try soaking the threads with penetrating oil and try again.
• Step Three: If your sink has a line that connects the hose to the faucet you can disconnect this.
• Step Four: Pull the old faucet out and clean the sink'south surface making sure to remove any rust or caked on debris.

Installing the New Faucet

• Pace Ane: Using the measuring record, measure out the distance, from center to center, of the exterior holes of your sink. This is to make sure the new faucet will fit. Since all faucets are slightly different, read any installation instructions that come up with your new faucet. Follow all manufacturer'due south pre-assembly instructions and place the optional flange over the faucet opening.
• Stride Two: Seal the new faucet. If yous're using a gasket, place the gasket on the lip of the plate and thread the hoses through. If using plumber's putty, apply it effectually the base of the faucet and set the faucet in place.
• Stride Three: Nether the sink y'all can now thread on the flange and nut using a socket or basin wrench.
• Pace Four: If you lot're using pull-out faucets, a weight needs to exist added that will retract the pull-out spray.
• Step Five: Now it's time to attach the supply lines to the faucet and then to the shut-off valves. Common cold water connects on the correct and hot water on the left.
• Footstep 6: Turn on the water and check for leaking. If you find whatever leaks you lot'll demand to tighten the connections on the water supply line.

More than FROM QUESTIONSANSWERED.Cyberspace

Source: https://www.questionsanswered.net/article/how-to-replace-a-kitchen-faucet?utm_content=params%3Ao%3D740012%26ad%3DdirN%26qo%3DserpIndex

Posted by: baileyimince.blogspot.com

Share this post